Home > Products > PTFE Tape > High Temperature Ptfe Tape

Products

Industrial Teflon Tape

Name: China Customized Industrial Teflon Tape Suppliers Factory - Wholesale Service
Brand: Foreverseal
SKU: 213730661

Size: 19mmx0.2mmx15mx0.65g/cm3
Spool OD/ID: 86mm OD, 25mm ID
Spool/Cover color: Orange/Blue
Tape color: White
MOQ: 20000 pcs

Send Inquiry Chat Now

Description

FOREVERSEAL Industrial PTFE Teflon Tape is engineered for demanding threaded pipe connections in industrial, commercial, and automotive applications. Manufactured from 100% virgin PTFE (Polytetrafluoroethylene) resin sourced from DongYue and JuHua - China's two largest PTFE producers - this tape delivers reliable, leak-free seals across a wide range of operating conditions.

With a medium density of 0.65 g/cm³, this tape strikes the optimal balance between conformability and sealing strength. It is thick enough to fill thread gaps effectively, yet flexible enough for easy hand-wrapping in the field. The 0.2mm thickness provides excellent gap-filling capability on coarse or worn threads common in industrial fittings.

Rated for pressures up to 3,000 PSI and temperatures from -190°C to +260°C, this tape performs in environments where pipe dope and liquid sealants degrade, dry out, or fail. PTFE's exceptional chemical inertness means it resists attack from acids, bases, solvents, fuels, and oils - making it suitable for chemical processing, HVAC, automotive, and general industrial piping systems.

Real Industrial Applications

Application Area	Typical Use Cases	Why PTFE Tape Works	Density Recommendation
Industrial Piping	Chemical plants, water treatment, food & beverage production lines	Chemical inertness prevents degradation; fills thread gaps on metal fittings	Medium (0.35-0.8) for general; High (0.8-1.0) for high-pressure
HVAC & Refrigeration	Refrigerant line fittings, cooling system connections	Withstands pressure cycling and temperature extremes; non-degrading	Medium (0.35-0.8)
Automotive	Hydraulic and pneumatic threaded connections, fluid systems	Resists oils, fuels, and vibration; seals on fine automotive threads	Medium (0.35-0.8)
Commercial Plumbing	Large-diameter water supply fittings, commercial building plumbing	Thicker tape fills gaps on larger commercial threads; WRAS/ACS compliant for potable water	Medium (0.35-0.8)
Compressed Air Systems	Air compressor fittings, pneumatic tool connections	Prevents air leaks under pressure; chemical stability prevents breakdown	Medium (0.35-0.8)
General Maintenance	Plant maintenance, MRO operations, equipment repair	Quick, clean, reliable - no cure time needed unlike liquid sealants	Medium (0.35-0.8)

Industrial-Grade Core Performance Data

Beyond the basic specifications, industrial buyers need to understand three critical performance characteristics that determine whether a PTFE tape will hold up under real-world industrial conditions:

(1) High Tensile Strength - 8 N/mm²

Property	This Product	Industry Minimum	What It Means in Practice
Tensile Strength	8 N/mm² (MPa)	6 N/mm² (typical commodity tape)	Resists tearing during application on coarse or damaged industrial threads. At 8 N/mm², the tape will not shred or break when stretched over NPT, BSP, or G-thread profiles - even on worn or corroded fittings.
Why It Matters	Tearing during wrapping is the #1 field complaint with low-quality tape	-	A torn tape creates gaps in the seal layer, directly causing leaks. Higher tensile strength means the tape stays intact during installation - the seal you intend is the seal you get.
How We Achieve It	Premium virgin PTFE resin (DongYue/JuHua) + controlled calendering process	-	Virgin PTFE has inherently higher tensile strength than recycled material. Our calendering process controls the molecular orientation of the PTFE fibers, maximizing strength in the wrapping direction.

(2) Medium-High Density - 0.65 g/cm³ (Optimized for Industrial Use)

Density Grade	Cold Flow Behavior	Sealing Performance	Application Fit
Standard (0.25-0.35)	High cold flow - tape flows easily but thins out under sustained pressure	Adequate for low-pressure residential use	Not suitable for industrial piping
Medium (0.35-0.8)	Moderate, controlled cold flow - conforms to threads under compression without excessive thinning	Optimal: fills thread gaps and maintains seal integrity over time	THIS PRODUCT (0.65) - industrial piping, HVAC, automotive
High (0.8-1.0)	Low cold flow - minimal deformation under pressure	Very tight seal, but harder to wrap by hand	High-pressure industrial, gas lines
Full (1.0-1.5)	Very low cold flow - maintains shape almost indefinitely	Maximum long-term stability under extreme conditions	Extreme conditions, vacuum, cryogenic, oxygen

At 0.65 g/cm³, this tape occupies the upper range of Medium density. This is deliberate: the higher end of Medium provides better pressure resistance and lower cold flow than entry-level Medium tapes, while still being flexible enough for easy field installation. For industrial buyers, this means:

Lower cold flow: Better long-term seal stability than standard-density tapes

Controlled conformability: Tape fills thread gaps effectively when compressed between mating threads

Sustained performance: Tape maintains sealing performance over years of service life

(3) Extremely Low Cold Flow (Creep) - Why It Matters for Industrial Sealing

Cold flow (also called "creep") is the tendency of a material to slowly deform under sustained mechanical stress at room temperature. All PTFE exhibits some cold flow - it is an inherent property of the material. However, density is the primary variable that controls cold flow rate in PTFE thread seal tape.

For industrial applications, cold flow matters because:

Factor	Low Cold Flow (High/Full Density)	High Cold Flow (Standard Density)	Impact on Industrial Sealing
Pressure Retention	Seal maintains integrity under sustained pressure	Seal may thin and weaken over time under pressure	Industrial systems run continuously - seal must hold for years, not just during leak test
Temperature Cycling	Minimal dimensional change during thermal cycling	Greater deformation with each temperature cycle	Industrial piping experiences daily temperature swings - each cycle stresses the seal
Vibration Resistance	Dense tape resists displacement from vibration	Softer tape can be vibrated out of position over time	Pumps, compressors, and machinery create constant vibration - seal must stay put
Long-Term Reliability	Seal performance stable over 10+ years	Seal may degrade within 1-3 years	Industrial maintenance intervals are measured in years - rework is expensive

Specifications

Width	19mm (3/4")
Thickness	0.2mm
Length	15m
Density	0.65g/cm3
Tape color	White
Spool	86mm OD, 25mm ID
Packing	Option A: 10pcs/shrink,100pcs/box, 500pcs/ctn Option B: 10pcs/shrink,100pcs/box, 200pcs/ctn Option C: 10pcs/box, 250pcs/ctn (Packing cost A < B < C) Other customized packing allowed.
MOQ	20000 pcs
Delivery time	30-40 days after getting your prepayment

Technical Data:

Composition	100% virgin PTFE
Pressure Rating	up to 3,000PSI
Temp.Range	-190C to +260C
Tensile Strength	8 N/mm2
Elongation	Min 25%
Storage	Unlimited shelf life(less than 70F )/50% relative humidity out of direct sunlight
Flammability	Non-flammable

Our certificate

Certification	Standard / ID	Issuing Body	Scope	How to Verify
ISO 9001	ISO 9001:2015	WIT ASSESSMENT	Quality management system - all production processes	Request certificate copy from FOREVERSEAL
UL Listed	File No. MH48783	Underwriters Laboratories (UL)	PTFE thread sealing tape - flame retardancy and pressure integrity	Search "MH48783" at ul.com/product-iq
RoHS	EU Directive 2011/65/EU	SGS	Free from hazardous substances (lead, mercury, cadmium, etc.)	Request RoHS test report from FOREVERSEAL
REACH	EC 1907/2006	SGS	Registration, Evaluation, Authorisation of Chemicals - PTFE compliance	Request REACH compliance declaration
DVGW	DIN EN 751-3	DVGW (German Gas & Water Association)	Gas and water sealing applications - European market access	Search at dvgw-cert.com (pending registration number)
CE	Applicable EU Directives	ECM	European conformity marking for industrial products	CE declaration available upon request
WRAS	WRAS Material Approval	WRAS (UK)	Water Regulations Advisory Scheme - drinking water contact	Search at wras.co.uk (pending approval number)
ACS	ACS Certification	ACS (France)	Attestation de Conformite Sanitaire - drinking water contact in France	Request ACS certificate from FOREVERSEAL

ROHS_

ISO9001_

Our Products VS Others

Product Application

Packing ways

Option	Configuration	Carton Qty	Cost Level	Best For
Option A	10 pcs/shrink wrap → 100 pcs/box → 500 pcs/carton	500 pcs/ctn	Most economical	Volume distribution, wholesale buyers
Option B	10 pcs/shrink wrap → 100 pcs/box → 200 pcs/carton	200 pcs/ctn	Medium	Retail-ready packaging, easier handling
Option C	10 pcs/individual box → 250 pcs/carton	250 pcs/ctn	Premium	Retail display, brand-focused packaging

Other customized packing is available. Contact us with your requirements.

FAQS:

Q: What does "Industrial Teflon Tape" mean? Is it different from regular PTFE tape?

"Industrial Teflon Tape" and "PTFE thread seal tape" refer to the same product. "Teflon" is a DuPont brand name for PTFE (Polytetrafluoroethylene) - similar to how "Kleenex" is used for tissues. At FOREVERSEAL, all our tape is made from 100% virgin PTFE resin, not actual Teflon-brand material. The "industrial" designation refers to the Medium density (0.65 g/cm³) and thicker profile (0.2mm) suited for industrial-grade threaded connections.

Q: Which port do you ship from?

Shanghai and Ningbo are the nearest ports. We normally ship from Shanghai or Ningbo. FOB terms are standard, but we can accommodate EXW, CIF, and other terms upon request.

Q: Can we use our appointed forwarder?

Yes, absolutely. We normally do FOB terms, but we are flexible. If you have a preferred forwarder, just let us know and we will coordinate with them for pickup and shipping arrangements.

Q: What is your main market positioning?

We target the mid-to-high market - customers who need better quality products and are willing to pay for premium raw materials (DongYue/JuHua virgin PTFE), full certifications, and consistent batch quality. Our tape is not the cheapest on the market, and that is intentional: the cost of a leak far exceeds the cost of quality tape.

Q: Can I get a free sample before ordering?

Yes. We provide free samples for evaluation. Contact us with your specification requirements (width, thickness, density, color, spool size), and we will arrange sample shipment. For OEM/ODM customers, we can also produce custom samples with your logo and packaging design.

Thread Sealer For Diesel Fuel Lines

High Temp Ptfe Tape