Thread Tape For Gas Fittings

 

Thread tape for gas fittings is used in a variety of applications for sealing gas and liquid pipework and is available in various grades, differing in purity, thickness and width. Some grades of tape contain a large proportion of a material other than PTFE and may be lubricated with hydrocarbon based oils and greases. If these grades of tape come into contact with high pressure oxygen there is a chance that an ignition will occur with the risk of injury to the operator and damage to the equipment. Pure PTFE tape can be and is, used for sealing components in oxygen service provided it is lubricant-free.

 

Width	12mm (1/2")
Thickness	0.1mm
Length	12m
Density	1.6g/cm3
Tape color	Blue
Spool	56mm OD, 25mm ID
Packing	Option A: 10pcs/shrink,100pcs/box, 500pcs/ctn Option B: 10pcs/shrink,100pcs/box, 200pcs/ctn Option C: 10pcs/box, 250pcs/ctn (Packing cost A < B < C) Other customized packing allowed.
MOQ	20000 pcs
Delivery time	30-40 days after getting your prepayment

 

 

Composition	Min. 99% virgin PTFE, Max. 1% pigment
Pressure Rating	up to 10,000PSI
Temp.Range	-268C to +260C
Tensile Strength	15 N/mm2
Elongation	Min 50%
Storage	Unlimited shelf life(less than 70F )/50% relative humidity out of direct sunlight
Flammability	Non-flammable

 

 

 

 

 

 

Customer: Can we use appointed forwarder?

Foreverseal: Yes, of course, we normally do FOB terms

 

Customer: Is ptfe tape really chemically resistant?

Foreverseal: Actually, ptfe tape is immune to virtually all chemicals, including patrol and most acids.

 

Customer: Do you pass ISO 9001?

Foreverseal: Yes, we do