Most of the time, when installing the water pipe by yourself, no matter how to wrap the raw material tape, or find that the faucet is leaking or seeping, what is the matter? How to wrap the raw meal belt? We can start from the following three points:
How to wrap the raw meal belt? We can start from the following three points:
Point 1: The raw material belt needs to be wound along the thread direction, which greatly reduces the sealing performance;
Point 2: Never wrap all threads with raw material tape. In addition to preventing the raw material tape from entering the pipe, it will also reduce the sealing performance. It is recommended to start winding from the second thread tooth at the beginning of the thread and leave the front thread tooth. As shown in the following figure: Point 3: When winding the raw material belt, it needs to use a little force to ensure that the raw material belt will not be pulled off. The raw material belt wrapped in this way can be tight and firm enough to ensure the sealing.
After the raw meal belt is wrapped, it is not allowed to back off the thread once it is tightened, otherwise it should be rewound.
