High Temp Pipe Tape

 

High temp pipe tape is a kind of auxiliary equipment commonly used in the installation of liquid pipeline. It is used for the pipe fitting joint to enhance the tightness of the pipe joint. It is a new and ideal sealing material. Because of its non-toxic, tasteless, excellent sealing, insulation, corrosion resistance, is widely used in water treatment, natural gas, chemical, plastic, electronic engineering and other fields.

 

 

Width	19mm (3/4")
Thickness	0.2mm
Length	15m
Density	0.43g/cm3
Tape color	White
Spool	86mm OD, 25mm ID
Packing	Option A: 10pcs/shrink,100pcs/box, 500pcs/ctn Option B: 10pcs/shrink,100pcs/box, 200pcs/ctn Option C: 10pcs/box, 250pcs/ctn (Packing cost A < B < C) Other customized packing allowed.
MOQ	20000 pcs
Delivery time	30-40 days after getting your prepayment

 

 

Composition	100% virgin PTFE
Pressure Rating	up to 3,000PSI
Temp.Range	-190C to +260C
Tensile Strength	8 N/mm2
Elongation	Min 25%
Storage	Unlimited shelf life(less than 70F )/50% relative humidity out of direct sunlight
Flammability	Non-flammable

 

 

 

 

 

 

Customer: Can too much Teflon tape cause leaks?

Foreverseal: If you use too much Teflon tape, this can crack the female adapter, leading to a leaky fitting. On the other hand, if you don’t put enough, the pipes can also leak. Expert plumbers advise to use just the right amount – not too much, not too little, even if it’s easier said than done. Our tip is to always inspect your work to ensure that you have tightly covered the entire length of the threads evenly and consistently.

 

Customer: What is common thickness for the PTFE tape?

Foreverseal: 0.075mm and 0.1mm thickness are popular, if you want thicker one, 0.2mm is for your option too.

 

Customer: Is ptfe tape toxic ?

Foreverseal: No, it’s non-toxic, it is safe used for drinking water