Thread Tape On Gas Lines

 

Thread tape on gas lines is manufactured especially for natural gas, propane, butane, water, oil and chemical lines, It is nonflammable and resists tearing and stretching for easy, efficient application on metal and plastic threads. It is heavier than white tape.

 

Width	12mm (1/2")
Thickness	0.1mm
Length	12m
Density	1.3g/cm3
Tape color	Blue
Spool	56mm OD, 25mm ID
Packing	Option A: 10pcs/shrink,100pcs/box, 500pcs/ctn Option B: 10pcs/shrink,100pcs/box, 200pcs/ctn Option C: 10pcs/box, 250pcs/ctn (Packing cost A < B < C) Other customized packing allowed.
MOQ	20000 pcs
Delivery time	30-40 days after getting your prepayment

 

 

Composition	Min. 99% virgin PTFE, Max. 1% pigment
Pressure Rating	up to 10,000PSI
Temp.Range	-268C to +260C
Tensile Strength	15 N/mm2
Elongation	Min 50%
Storage	Unlimited shelf life(less than 70F )/50% relative humidity out of direct sunlight
Flammability	Non-flammable

 

 

 

 

 

 

Customer: Do you have display box for the product?

Foreverseal: Yes, we have, but the packing cost is more expensive

 

Customer: Is ptfe tape toxic ?

Foreverseal: No, it’s non-toxic, it is safe used for drinking water

 

Customer: What PTFE Tape Alternatives are Available?

Foreverseal: Pipe joint compounds (also known as pipe dope or pipe glue) can be used instead of PTFE tape. However, it should be noted that these alternatives typically have higher strength than tape so are ideally suited as permanent seals rather than temporary solutions.

 

When to Use

Thread tape on gas lines is used to wrap the male end of threaded connections when joining pipes and couplings that screw together. It works particularly well on showerheads, tub spouts, and water supply lines. As helpful as it is, however, there are a few times when you'll want to skip the tape.

 

When Not to Use

One is when dealing with the female end of a pipe. Never try to smooth thread tape on gas lines into the threads of a female pipe fitting. Use it on male ends only. Don't apply thread tape on gas lines to compression fittings or in other situations where there is an O-ring or washer built into the connection.