High Density Green Teflon Tape

 

Extra processing makes this degreased tape suitable for Oxygen use. UL approved. This high density green Teflon tape is used widely within the oxygen industry.

Our high density Green Teflon tape is free of any residual petroleum fraction and is safe to use on oxygen systems. It is important to follow proper safety procedures when using any type of sealing tape to prevent leaks and other safety hazards.

 

 

Width	12mm (1/2")
Thickness	0.1mm
Length	13.2m
Density	1.2g/cm3
Tape color	Green
Spool	56mm OD, 25mm ID
Packing	Option A: 10pcs/shrink, 250pcs/box, 1000pcs/ctn Option B: 10pcs/shrink, 100pcs/box, 1000pcs/ctn Option C: 10pcs/box, 1000pcs/ctn (Packing cost A < B < C) Other customized packing allowed.
MOQ	20000 pcs
Delivery time	30-40 days after getting your prepayment

 

 

Composition	Min. 99% virgin PTFE, Max. 1% pigment
Pressure Rating	up to 10,000PSI
Temp.Range	-268C to +260C
Tensile Strength	15 N/mm2
Elongation	Min 50%
Storage	Unlimited shelf life(less than 70F )/50% relative humidity out of direct sunlight
Flammability	Non-flammable

 

 

 

 

 

 

 

Customer: Can too much Teflon tape cause leaks?

Foreverseal: If you use too much Teflon tape, this can crack the female adapter, leading to a leaky fitting. On the other hand, if you don’t put enough, the pipes can also leak. Expert plumbers advise to use just the right amount – not too much, not too little, even if it’s easier said than done. Our tip is to always inspect your work to ensure that you have tightly covered the entire length of the threads evenly and consistently.

 

Customer: What is Pink Teflon Tape Used For?

Foreverseal: Most plumbers that deal with water lines use pink Teflon as the plumbing tape. Pink Teflon tape is inert and can withstand high temperatures and pressure. It can therefore be used in hot water feeding lines.

 

Customer: Do you pass ISO 9001?

Foreverseal: Yes, we do