Latest Products
Contact Us
- No.278, Qingxian Road, Linglong Street, Linan, Hangzhou, Zhejiang, China.
- fiona@foreverseal.com
- +8613396551886
PTFE Tape for Plastic Fittings
For water lines, drains, air compressors and faucets, ptfe tape for plastic fittings works very well, as long as it's installed properly by wrapping the threads in the direction they will turn while joining. Ptfe tape for plastic fittings is made of 100% Polytetrafluoroethylene with good density, and it will not harden or crack, with high-temperature resistance. It's clean, non-messy and simple to use.
Description
For water lines, drains, air compressors and faucets, ptfe tape for plastic fittings works very well, as long as it's installed properly by wrapping the threads in the direction they will turn while joining. Ptfe tape for plastic fittings is made of 100% Polytetrafluoroethylene with good density, and it will not harden or crack, with high-temperature resistance. It's clean, non-messy and simple to use.
- Specifications
|
Width |
12mm (1/2") |
|
Thickness |
0.075mm |
|
Length |
12m |
|
Density |
0.4g/cm3 |
|
Tape color |
White |
|
Spool |
56mm OD, 25mm ID |
|
Packing |
Option A: 10pcs/shrink, 250pcs/box, 1000pcs/ctn Option B: 10pcs/shrink, 100pcs/box, 1000pcs/ctn Option C: 10pcs/box, 1000pcs/ctn (Packing cost A < B < C) Other customized packing allowed. |
|
MOQ |
20000 pcs |
|
Delivery time |
30-40 days after getting your prepayment |
- Technical Data:
|
Composition |
100% virgin PTFE |
|
Pressure Rating |
up to 3,000PSI |
|
Temp.Range |
-190C to +260C |
|
Tensile Strength |
8 N/mm2 |
|
Elongation |
Min 25% |
|
Storage |
Unlimited shelf life(less than 70F )/50% relative humidity out of direct sunlight |
|
Flammability |
Non-flammable |
- Our certificate
- Our Products VS Others
- Product Application
- Packing ways
- FAQS:
Customer: What is the maximum pipe size you can use thread tape on?
Foreverseal: There are no limitations on the diameter of the pipe. You should always wrap the tape enough times around the male threads in order to fill the spigot (female threads). Any pipe sizes over 1¼” with pressure and fluids moving through it should have the male threads wrapped with tape and then the approved pipe joint compound spread over the tape.
Customer: How long will it take to make sample?
Foreverseal: It takes around 7 days to arrange samples
Customer: Can we use appointed forwarder?
Foreverseal: Yes, of course, we normally do FOB terms
You Might Also Like
