Thread Seal Tape PTFE DVGW-proofed Role 12m/12mm /0,1mm GRP (inner Thread)

Thread seal tape PTFE DVGW-proofed role 12m/12mm /0,1mm GRP (inner thread) is used to seal threaded connections to prevent water and gas leaks. 
Not all PTFE tapes are created equal, however. It is important to select a tape that meets industry standards such as being DVGW-proofed. This means that the tape has been tested and approved by the German Technical and Scientific Association for Gas and Water (DVGW) for its quality and performance.
The role of PTFE tape is to provide a barrier between the threaded connection and the pressure that is being applied. In order to do this effectively, the tape needs to be of the appropriate size - typically 12m/12mm/0,1mm. Furthermore, the inner thread configuration also needs to be considered. The use of GRP (glass reinforced plastic) in the tape's inner thread helps to ensure a tight and secure seal.

Thread seal tape PTFE DVGW-proofed role 12m/12mm /0,1mm GRP (inner thread) is an important component in any plumbing project. Proper application is also crucial to ensure the tape remains in place and creates an effective barrier against leaks.

 

 

Width	12mm (1/2")
Thickness	0.1mm
Length	12m
Density	1.0g/cm3
Tape color	White
Spool	56mm OD, 25mm ID
Packing	10pcs/shrink, 250pcs/box, 1000pcs/ctn
MOQ	20000 pcs
Delivery time	30-40 days after getting your prepayment

 

 

Composition	100% virgin PTFE
Pressure Rating	up to 3,000PSI
Temp.Range	-190C to +260C
Tensile Strength	8 N/mm2
Elongation	Min 25%
Storage	Unlimited shelf life(less than 70F )/50% relative humidity out of direct sunlight
Flammability	Non-flammable

 

 

 

 

 

 

 

 

 

 

 

Customer: What's the density for Thread seal tape PTFE DVGW-proofed role 12m/12mm /0,1mm GRP (inner thread)?

Foreverseal: It's normally 1.0g/cm3.

 

Customer: How many workers do you have?

Foreverseal: 60-70 workers.

 

Customer: Can we pass DVGW certificate?

Foreverseal: Yes, we do.